Common problems with the advertising gateways during operation and server maintenance instructions

2026-03-21 13:57:03

With the widespread use of intelligent advertising gates in the parking fee management system, their economic benefits are becoming increasingly prominent. However, because advertising gates are frequently activated in the parking fee system software, and the connected machinery equipment of the advertising gates is compact and complex, if the maintenance of the advertising gates is not done properly, it will not only cause trouble for the residents of the community, but also increase the costs of the advertising operators. Therefore, in order to solve these problems for us, I will explain below the common problems in the operation of the advertising gates and the clarification of server maintenance. The specific content is as follows: 

I. Common Problems in the Operation of Advertising Gates 

Before using the advertising gate system software, it is essential to check whether the working voltage of the power supply is compatible with this product. This is to fully consider the situation where some areas have under-voltage protection. Even when the working voltage is as low as 180V, the advertising gate system can still maintain its reliable working characteristics. 

2. When it is necessary to open the gate of the advertising barrier, simply press the "Raise Gate" button on the control panel or controller. At this moment, the gate will automatically rise and then automatically stop after a while. 

3. When it is necessary to close the gate of the advertising barrier, simply press the "Lower Gate" button on the control panel or controller. At this moment, the gate will automatically lower and then stop automatically in time. 

4. During the entire lowering process, if there are vehicles or non-motorized vehicles in the way, you can press the "Raise Gate" button. The advertising gate will immediately move in the direction of raising the gate, or press the "Stop" button, and the gate will stop operating. (Note: Please do not press the "Stop" button when the system is operating normally.) 

5. In case of power failure and if the gate of the advertising barrier is in a horizontal position, you can open the tail gate of the passage barrier and extend the gate by waving your hand. After making the call, immediately press the "lower the gate" button. The gate will automatically lower and return to its normal state for use. 

Double-sided Cappu light box gate booth 

II. Maintenance Instructions for Advertising Gate Server 

1. Common soft cloth. Wipe off the dust and oil stains on the surface of the advertising gate control host cabinet, and keep the surface of the cabinet clean. 

2. Regularly check whether the wiring parts of the controller of the advertising gate are loose or disordered. Keep the control system in an area with natural ventilation and dryness. Avoid hand washing and soaking to ensure the stability of its characteristics and extend the product's service life. 

3. Regularly check the connections of all parts of the advertising gate machine and the connection status of the fitness equipment parts. For loose standard components, tighten them. 

4. Regularly check the balance spring to ensure that it is not cracked or has any cracks. 

5. Regularly check whether there are any poor conditions such as oil leakage in the advertising gate deceleration machine. 

6. Regularly check the connection status of the advertising gate system software protection area to ensure reliable contact within the software protection zone. Ensure that all advertising gate systems are optimized and operating normally.